Congratulations on proceeding with your geoexchange design!
In order for us to create your personalised geoexchange design, we recommend a full design feasibility process which includes both Heat Load Calculations as well as a Geoexchange Design and Analysis Report.
- Heat Load Calculation – A heat load calculation for your individual home. This calculation goes beyond the standard contractors rules of thumb and includes factors such as insulation, glazing, shading and ventilation to ensure you receive the optimal system for your home.
- Residential Design Full Report: Heat Load Calculation Report plus an Energy and Financial Analysis based on:
- A Geoexchange design that has been based on the results of the Heat Load Calculation and optimised to your ground conditions;
- A summary of installation costs for your individual Geoexchange system; and
- Calculation of operating costs and energy savings, including comparison with conventional systems.
Due to the intensive engineering involved in the design process and the value of the information prepared, a small fee (including GST) is applied.
Full Terms and Conditions
Please select the relevant report option for your project below to begin the design process:
Residential Design *Full Report*
|
Building Heat Load Calculation $220.00 |
Below is a summary of the design process, what you can expect and what we need from you to create your custom system:
Geoexchange Residential Design Process
The Geoexchange Residential Design Process allows us to design the optimal Geoexchange system for your home. We get to know your home from a building and structural sense for the financial benefits as well as how you will live in your home to ensure the comfort benefits.
It requires information on both your home and the ground conditions.
The end result of the design process is a formal quotation which will provide you with the following:
- A heat load calculation for your individual home. This calculation goes beyond the standard contractors rules of thumb and includes factors such as insulation, glazing, shading and ventilation to ensure you receive the optimal system for your home.
- A Geoexchange design that has been optimized to your ground conditions;
- A summary of installation costs for your individual Geoexchange system; and
- Calculation of operating costs and energy savings, including comparison with conventional systems.
Sample: Energy & Financial Analysis Report | Sample: Residential Heat Load & Loss Report |
![]() |
![]() |
In order to complete this process we require the following:
- House plans (pdf) showing floor plans, elevations and building materials (including insulation, window glazing etc);
- Site plan (pdf) showing the land available for the loop field as well as any ponds, dams or bores present on site;
- Site address;
- Any available soil reports or information on site geology or hydrogeology;
- Your preferred conditioning system: air ducted, hydronics or both;
- Your preferred zoning: day/night, whole residence or any other mix of zones, spaces or levels;
- Is pre-heating of domestic hot water required?;
- Is there a pool, spa or other application you would like included;
- Conventional systems under consideration, including installation costs if available (for cost-benefit analysis); and
- Local utility prices for electricity, natural gas and/or LPG.
Do not worry if any of the above is not available as it does not mean the end of the design process. We have a number of in-house resources that enable us to readily obtain such information.
If you are keen to get started, please click on the below button.